Tryag File Manager

Home || Turbo Force || B-F Config_Cpanel

; ; Copyright 2020 New Relic Corporation. All rights reserved. ; SPDX-License-Identifier: Apache-2.0 ; ; This file contains the various settings for the New Relic PHP agent. There ; are many options, all of which are described in detail at the following URL: ; https://docs.newrelic.com/docs/agents/php-agent/configuration/php-agent-configuration ; ; If you use a full path to the extension you insulate yourself from the ; extension directory changing if you change PHP installations or versions. ; If you do not use an absolute path then the file must be installed in the ; active configuration's extension directory. extension = "newrelic.so" [newrelic] ; Setting: newrelic.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enable or disable the agent. Please note that you cannot globally ; disable the agent and then selectively enable it on a per-directory ; basis. If you disable the agent in the global INI file then the ; agent will not initialize at all. However, you can selectively ; disable the agent on a per-directory basis. ; ;newrelic.enabled = true ; Setting: newrelic.license ; Type : string ; Scope : per-directory ; Default: none ; Info : Sets the New Relic license key to use. This can vary from directory ; to directory if you are running a multi-tenant system. By special ; dispensation if you upgraded from a previous version of the agent ; where the license key was set in the daemon, the installation and ; upgrade script will have preserved your license key from the file ; /etc/newrelic/newrelic.cfg, but ONLY if you installed via rpm/yum ; or dpkg. The key is saved in /etc/newrelic/upgrade_please.key ; and the agent will look for that file if you do not specify a valid ; license here. ; It is *STRONGLY* recommended that you set the license key in your ; INI file(s) and do not rely on the key file being present. Also ; please note that even if you are not letting the agent start the ; daemon and are still using newrelic.cfg (see below) the license ; keyword in that file is no longer obeyed. Instead the agent will ; use the preserved value of that license from the key file. ; Once you have updated your INI files to contain the license we ; urge you to remove /etc/newrelic/upgrade_please.key in order to ; eliminate the potential for confusion about exactly where the key ; is coming from. ; newrelic.license = "REPLACE_WITH_REAL_KEY" ; Setting: newrelic.logfile ; Type : string ; Scope : system ; Default: none ; Info : Sets the name of the file to send log messages to. ; newrelic.logfile = "/var/log/alt-php81-newrelic/php_agent.log" ; Setting: newrelic.loglevel ; Type : string ; Scope : system ; Default: "info" ; Info : Sets the level of detail to include in the log file. You should ; rarely need to change this from the default, and usually only under ; the guidance of technical support. ; Must be one of the following values: ; always, error, warning, info, verbose, debug, verbosedebug ; ;newrelic.loglevel = "info" ; Setting: newrelic.high_security ; Type : boolean ; Scope : system ; Default: false ; Info : Enables high security for all applications. When high security is ; enabled, the following behavior will take effect: ; * Raw SQL strings will never be gathered, regardless of the value of ; newrelic.transaction_tracer.record_sql. ; * Request parameters will never be captured, regardless of the ; newrelic.attributes configuration settings. ; * The following API functions will have no effect, and will return ; false: ; newrelic_add_custom_parameter ; newrelic_set_user_attributes ; newrelic_record_custom_event ; ; IMPORTANT: If you change this setting, you must also change the RPM ; UI security setting. If the two settings do not match, then no data ; will be collected. ; ; IMPORTANT: This setting is not compatible with ; newrelic.security_policies_token. Only one may be set. If both are ; set an error will be thrown and the agent will not connect. ; ;newrelic.high_security = false ; Setting: newrelic.appname ; Type : string ; Scope : per-directory ; Default: "PHP Application" ; Info : Sets the name of the application that metrics will be reported into. ; This can in fact be a list of up to 3 application names, each of ; which must be separated by a semi-colon. The first name in any such ; list is considered the 'primary' application name and must be unique ; for each account / license key. ; newrelic.appname = "PHP Application" ; Setting: newrelic.process_host.display_name ; Type : string ; Scope : system ; Default: none ; Info : Sets a custom display name for your application server in the New ; Relic UI. Servers are normally identified by host and port number. ; This setting allows you to give your hosts more recognizable names. ; ;newrelic.process_host.display_name = "" ; ; Beginning with version 3.0 of the agent, the daemon can be automatically ; started by the agent. There is no need to start the daemon before starting ; Apache or PHP-FPM. All of the newrelic.daemon.* settings are options that ; control the behavior of the daemon. These settings are converted into the ; appropriate command line options when the agent starts the daemon. This is ; now the preferred method of starting the daemon. There are still usage cases ; (such as using a single daemon for serving multiple Apache instances) where ; you may want to start the daemon via it's init script, but for most users, ; this is the best place to configure and start the daemon. ; ; The agent will only launch the daemon if one isn't already running. Also ; note that the agent will NOT stop the daemon once it has started. If you ; want control over exactly when the daemon starts and stops you can still ; achieve that by creating a daemon configuration file (located by default at ; /etc/newrelic/newrelic.cfg) and running the chkconfig or equivalent command. ; Please see the newrelic.cfg template file for details. That template file ; is located at /usr/lib/newrelic-php5/scripts/newrelic.cfg.template. ; ; Also please note that the options here and in newrelic.cfg are identical, ; except that in this file they are preceded with "newrelic.daemon.". ; ; Setting: newrelic.daemon.logfile ; Type : string ; Scope : system ; Default: none ; Info : Sets the name of the file to send daemon log messages to. ; newrelic.daemon.logfile = "/var/log/alt-php81-newrelic/newrelic-daemon.log" ; Setting: newrelic.daemon.loglevel ; Type : string ; Scope : system ; Default: "info" ; Info : Sets the level of detail to include in the daemon log. You should ; rarely need to change this from the default, and usually only under ; the guidance of technical support. ; Must be one of the following values: ; always, error, warning, info, debug ; ; The values verbose and verbosedebug are deprecated aliases for debug. ; ;newrelic.daemon.loglevel = "info" ; Setting: newrelic.daemon.address (alias: newrelic.daemon.port) ; Type : string or integer ; Scope : system ; Default: "@newrelic" on Linux, "/tmp/.newrelic.sock" otherwise ; Info : Sets how the agent and daemon communicate. How this is set can impact ; performance. ; ; On Linux, the default is to use the abstract socket "@newrelic". An ; abstract socket can be created by prefixing the socket name with '@'. ; ; On MacOS and FreeBSD, the default is to use a UNIX-domain socket ; located at "/tmp/.newrelic.sock". If you want to use UNIX domain ; sockets then this value must begin with a '/'. ; ; If you set this to an integer value in the range 1-65535, then this ; will instruct the agent to use a normal TCP socket on the port ; specified. This may be easier to use if you are using a chroot ; environment. ; ; To connect to a daemon that is running on a different host, set this ; value to '<host>:<port>', where '<host>' denotes either a host name ; or an IP address and '<port>' denotes a valid port number. IPv6 is ; supported. ; ; In order to use a TCP socket with a port in the range 1-1023, ; the daemon must be started by the super-user. This is a fundamental ; OS limitation and not one imposed by the daemon itself. ; ;newrelic.daemon.address = "/tmp/.newrelic.sock" ; Setting: newrelic.daemon.ssl_ca_bundle ; Type : string ; Scope : system ; Default: none ; Info : Sets the location of a file containing CA certificates in PEM ; format. When set, the certificates in this file will be used to ; authenticate the New Relic collector servers. If ; newrelic.daemon.ssl_ca_path is also set (see below), the ; certificates in this file will be searched first, followed by the ; certificates contained in the newrelic.daemon.ssl_ca_path ; directory. ; ;newrelic.daemon.ssl_ca_bundle = "" ; Setting: newrelic.daemon.ssl_ca_path ; Type : string ; Scope : system ; Default: none ; Info : Sets the location of a directory containing trusted CA certificates ; in PEM format. When set, the certificates in this directory will be ; used to authenticate the New Relic collector servers. If ; newrelic.daemon.ssl_ca_bundle is also set (see above), it will be ; searched first followed by the certificates contained in ; newrelic.daemon.ssl_ca_path. ; ;newrelic.daemon.ssl_ca_path = "" ; Setting: newrelic.daemon.proxy ; Type : string ; Scope : system ; Default: none ; Info : Sets the host and user credentials to use as an egress proxy. This ; is only used if your site requires a proxy in order to access ; external servers on the internet, in this case the New Relic data ; collection servers. This is expressed in one of the following forms: ; hostname ; hostname:port ; user@hostname ; user@hostname:port ; user:password@hostname ; user:password@hostname:port ; ;newrelic.daemon.proxy = "" ; Setting: newrelic.daemon.pidfile ; Type : string ; Scope : system ; Default: OS dependent ; Info : Sets the name of the file to store the running daemon's process ID ; (PID) in. This file is used by the daemon startup and shutdown ; script to determine whether or not the daemon is already running. ; ;newrelic.daemon.pidfile = "" ; Setting: newrelic.daemon.location ; Type : string ; Scope : system ; Default: /usr/bin/newrelic-daemon ; Info : Sets the name of the daemon executable to launch. ; Please note that on OpenSolaris where /usr is frequently a read-only ; file system, the default daemon location is ; /opt/newrelic/bin/newrelic-daemon. ; newrelic.daemon.location = "/opt/alt/php81/usr/bin/newrelic-daemon" ; Setting: newrelic.daemon.collector_host ; Type : string ; Scope : system ; Default: none ; Info : Sets the host name of the New Relic data collector host to use. ; Please note that this is NOT any form of local host. It refers to ; the New Relic provided host. There is very little reason to ever ; change this from the default except in certain very special ; circumstances, and then only on instruction from a New Relic sales ; person or support staff member. ; ;newrelic.daemon.collector_host = "" ; Setting: newrelic.daemon.dont_launch ; Type : integer (0, 1, 2 or 3) ; Scope : system ; Default: 0 ; Info : If you prefer to have the daemon launched externally before the ; agent starts up, set this variable to non-zero. The value you ; choose determines exactly when the agent is allowed to start the ; daemon: ; 0 - agent can start the daemon any time it needs to ; 1 - non-CLI (i.e Apache / php-fpm) agents can start the daemon ; 2 - only CLI agents can start the daemon ; 3 - the agent will never start the daemon ; ;newrelic.daemon.dont_launch = 0 ; Setting: newrelic.daemon.utilization.detect_aws ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of whether the system is running on AWS. This will ; create a small amount of network traffic on daemon startup. ; ;newrelic.daemon.utilization.detect_aws = true ; Setting: newrelic.daemon.utilization.detect_azure ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of whether the system is running on Azure. This will ; create a small amount of network traffic on daemon startup. ; ;newrelic.daemon.utilization.detect_azure = true ; Setting: newrelic.daemon.utilization.detect_gcp ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of whether the system is running on Google Cloud ; Platform. This will create a small amount of network traffic on ; daemon startup. ; ;newrelic.daemon.utilization.detect_gcp = true ; Setting: newrelic.daemon.utilization.detect_pcf ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of whether the system is running on Pivotal Cloud ; Foundry. ; ;newrelic.daemon.utilization.detect_pcf = true ; Setting: newrelic.daemon.utilization.detect_docker ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of a system running on Docker. This will be used ; to support future features. ; ;newrelic.daemon.utilization.detect_docker = true ; Setting: newrelic.daemon.utilization.detect_kubernetes ; Type : boolean ; Scope : system ; Default: true ; Info : Enable detection of whether the system is running in a Kubernetes ; cluster. ; ;newrelic.daemon.utilization.detect_kubernetes = true ; Setting: newrelic.daemon.app_timeout ; Type : time specification string ("5m", "1h20m", etc) ; Scope : system ; Default: 10m ; Info : Sets the elapsed time after which an application will be considered ; inactive. Inactive applications do not count against the maximum ; limit of 250 applications. Allowed units are "ns", "us", "ms", "s", ; "m", and "h". ; ; A value of 0 is interpreted as "no timeout". New applications with ; this setting count toward the 250 application limit. In addition, with ; a 0-value setting, the agent's daemon process cannot release a small ; amount of memory per application back to the operating system. ; ; We do not recommend using a 0-value setting except under the guidance ; of technical support; instead, for occasional background transactions, ; we suggest using a value of twice the interval (so, for an hourly ; background job, set the timeout to 2 hours). ;newrelic.daemon.app_timeout = 10m ; Setting: newrelic.daemon.app_connect_timeout ; Type : time specification string ("1s", "5m", etc) ; Scope : system ; Default: 0 ; Info : Sets the maximum time the agent should wait for the daemon ; connecting an application. A value of 0 causes the agent to only ; make one attempt at connecting to the daemon. Allowed units are ; "ns", "us", "ms", "s", "m", and "h". ; ; With this timeout set, the agent will not immediately drop a ; transaction when the daemon hasn't connected to the backend yet, but ; rather grant the daemon time to establish the connection. ; ; If setting a timeout, the recommended value is 10s. It is ; recommended to only set this timeout when instrumenting long-lived ; background tasks, as in case of connection problems the agent will ; block for the given timeout at every transaction start. ; ;newrelic.daemon.app_connect_timeout = 0 ; Setting: newrelic.daemon.start_timeout ; Type : time specification string ("1s", "5m", etc) ; Scope : system ; Default: 0 ; Info : Sets the maximum time the agent should wait for the daemon ; to start after a daemon launch was triggered. A value of 0 causes ; the agent to not wait. Allowed units are "ns", "us", "ms", "s", "m" ; and "h". ; ; The specified timeout value will be passed to the daemon via the ; --wait-for-port flag. This causes daemon startup to block until a ; socket is acquired or until the timeout has elapsed. ; ; If setting a timeout, the recommended value is 2s to 5s. It is ; recommended to only set this timeout when instrumenting long-lived ; background tasks, as in case of daemon start problems the agent will ; block for the given timeout at every transaction start. ; ;newrelic.daemon.start_timeout = 0 ; Setting: newrelic.error_collector.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enable the New Relic error collector. This will record the 20 most ; severe errors per harvest cycle. It is rare to want to disable this. ; Please also note that your New Relic subscription level may force ; this to be disabled regardless of any value you set for it. ; ;newrelic.error_collector.enabled = true ; Setting: newrelic.error_collector.ignore_user_exception_handler ; Type : boolean ; Scope : per-directory ; Default: false ; Info : If enabled, the New Relic error collector will ignore any exceptions ; that are handled by an exception handler installed with ; set_exception_handler(). ; ; If an exception handler has not been installed, this setting will ; have no effect, as PHP will turn the uncaught exception into a fatal ; error and it will be handled accordingly by the New Relic error ; collector. ; ;newrelic.error_collector.ignore_user_exception_handler = false ; Setting: newrelic.error_collector.ignore_exceptions ; Type: string ; Scope: per-directory ; Default: none ; Info: A comma separated list of exception classes that the agent should ; ignore. When an unhandled exception occurs, the agent will perform ; the equivalent of `$exception instanceof Class` for each of the ; classes listed. If any of those checks returns true, the agent ; will not record an error. ; ; Please note that this setting only applies to uncaught exceptions. ; Exceptions recorded using the newrelic_notice_error API are not ; subject to filtering. ; ;newrelic.error_collector.ignore_exceptions = "" ; Setting: newrelic.error_collector.ignore_errors ; Type: int or a bitwise expression of PHP-defined error constants ; Scope: per-directory ; Default: none ; Info: Sets the error levels that the agent should ignore. ; ; The value for this setting uses similar syntax to the error syntax ; for the PHP error reporting. For example, to configure the PHP Agent ; to ignore E_WARNING and E_ERROR level errors, use: ; ; newrelic.error_collector.ignore_errors = E_WARNING | E_ERROR ; ; or ; ; newrelic.error_collector.ignore_errors = 3 ; ; The list of constants are available at: ; http://php.net/manual/en/errorfunc.constants.php ; ; Please note that this setting does not apply to errors recorded ; using the newrelic_notice_error API. ; ;newrelic.error_collector.ignore_errors = 0 ; Setting: newrelic.error_collector.record_database_errors ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Currently only supported for MySQL database functions. If enabled, ; this will cause errors returned by various MySQL functions to be ; treated as if they were PHP errors, and thus subject to error ; collection. This is only obeyed if the error collector is enabled ; above and the account subscription level permits error trapping. ; ;newrelic.error_collector.record_database_errors = false ; Setting: newrelic.error_collector.prioritize_api_errors ; Type : boolean ; Scope : per-directory ; Default: false ; Info : If the error collector is enabled and you use the New Relic API to ; notice an error, if this is set to true then assign the highest ; priority to such errors. ; ;newrelic.error_collector.prioritize_api_errors = false ; Setting: newrelic.browser_monitoring.auto_instrument ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables automatic real user monitoring ("auto-RUM"). ; When enabled will cause the agent to insert a header and a footer ; in HTML output that will time the actual end-user experience. ; ;newrelic.browser_monitoring.auto_instrument = true ; Setting: newrelic.transaction_tracer.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables the transaction tracer. When enabled this will ; produce a detailed call graph for any transaction that exceeds a ; certain threshold (see next entry). Only one transaction trace per ; application per harvest cycle is stored and it is always the slowest ; transaction during that cycle. Transaction traces are extremely ; useful when diagnosing problem spots in your application. Please ; note that TT's may be disabled by your account subscription level ; regardless of what you set here. ; ;newrelic.transaction_tracer.enabled = true ; Setting: newrelic.transaction_tracer.threshold ; Type : string with a time specification or the word "apdex_f" ; Scope : per-directory ; Default: "apdex_f" ; Info : Specifies the threshold above which a transaction becomes a ; candidate for the transaction tracer. This can either be an absolute ; time value like "200ms" or "1s250ms" or "1h30m" or "750us" or the ; word "apdex_f". This last value, "apdex_f", means "4 times apdex_t". ; Thus the threshold changes according to your apdex_t setting. This ; is the default. ; ;newrelic.transaction_tracer.threshold = "apdex_f" ; Setting: newrelic.transaction_tracer.detail ; Type : integer in the range 0-1 ; Scope : per-directory ; Default: 1 ; Info : Sets the level of detail in a transaction trace. Setting this to 0 ; will only show the relatively few PHP functions that New Relic has ; deemed to be "interesting", as well as any custom functions you set ; (see below). A setting of 1 will trace and time all user functions. ; ; In earlier releases of the agent this was known as "top100". ; ;newrelic.transaction_tracer.detail = 1 ; Setting: newrelic.transaction_tracer.slow_sql ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables the "slow SQL" tracer. When enabled, this will ; record the top 10 slowest SQL calls along with a stack trace of ; where the call occurred in your code. ; ;newrelic.transaction_tracer.slow_sql = true ; Setting: newrelic.transaction_tracer.stack_trace_threshold ; Type : time specification string ("500ms", "1s750ms" etc) ; Scope : per-directory ; Default: 500ms ; Info : Sets the threshold above which the New Relic agent will record a ; stack trace for a transaction trace. ; ;newrelic.transaction_tracer.stack_trace_threshold = 500 ; Setting: newrelic.transaction_tracer.explain_enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables requesting "explain plans" from MySQL databases ; accessed via MySQLi or PDO_MySQL for slow SQL calls. The threshold ; for requesting explain plans is defined below. ; ;newrelic.transaction_tracer.explain_enabled = true ; Setting: newrelic.transaction_tracer.explain_threshold ; Type : time specification string ("750ms", "1s 500ms" etc) ; Scope : per-directory ; Default: 500ms ; Info : Used by the slow SQL tracer to set the threshold above which an SQL ; statement is considered "slow", and to set the threshold above which ; the transaction tracer will request an "explain plan" from the data- ; base for slow SQL. This latter feature may not be active yet, please ; refer to the agent release notes to see when it becomes available. ; Only relevant if explain_enabled above is set to true. ; ;newrelic.transaction_tracer.explain_threshold = 500 ; Setting: newrelic.transaction_tracer.record_sql ; Type : "off", "raw" or "obfuscated" ; Scope : per-directory ; Default: "obfuscated" ; Info : Sets how SQL statements are recorded (if at all). If this is set to ; "raw" then no attempt is made at obfuscating SQL statements. ; USING "raw" IS HIGHLY DISCOURAGED IN PRODUCTION ENVIRONMENTS! ; Setting this to "raw" has considerable security implications as it ; can expose sensitive and private customer data. ; ;newrelic.transaction_tracer.record_sql = "obfuscated" ; Setting: newrelic.transaction_tracer.custom ; Type : string ; Scope : per-directory ; Default: none ; Info : Sets the name(s) of additional functions you want to instrument and ; appear in transaction traces. This is only meaningful if you have ; set newrelic.transaction_tracer.detail to 0. This can be a comma- ; separated list of function or class method names. ; ;newrelic.transaction_tracer.custom = "" ; Setting: newrelic.transaction_tracer.internal_functions_enabled ; Type : boolean ; Scope : system ; Default: false ; Info : Enables or disables support for tracing internal functions (that is, ; functions written in C and provided either via the PHP standard ; library or PECL extensions). When enabled, internal functions will ; appear in transaction traces like functions written in PHP. ; ; Note that enabling this option may result in transactions being up to ; 5% slower. Enabling this option is only recommended when specifically ; debugging performance issues where an internal function is suspected ; to be slow. ; ;newrelic.transaction_tracer.internal_functions_enabled = false ; Setting: newrelic.framework ; Type : string ; Scope : per-directory ; Default: empty (auto-detect framework) ; Info : Disables automatic framework detection, telling the agent to ; attempt to name transactions according to the specified framework. ; Specifying "no_framework" will disable framework-related transaction ; naming entirely. Please let us know at support.newrelic.com if you ; encounter a failure with framework autodetection. ; ; Must be one of the following values: ; cakephp, codeigniter, drupal, drupal8, joomla, kohana, laravel, ; magento, magento2, mediawiki, slim, symfony2, symfony4, ; wordpress, yii, zend, zend2, no_framework ; ; Note that "drupal" covers only Drupal 6 and 7 and "symfony2" ; now only supports Symfony 3.x. ; ;newrelic.framework = "" ; Setting: newrelic.webtransaction.name.remove_trailing_path ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Used to aid naming transactions correctly when an unsupported ; framework is being used. This option will cause anything after the ; script name to be stripped from a URL. For example, setting this ; would cause the "/xyz/zy" to be stripped from a URL such as ; "/path/to/foo.php/xyz/zy". ; ;newrelic.webtransaction.name.remove_trailing_path = false ; Setting: newrelic.webtransaction.name.functions ; Type : string ; Scope : per-directory ; Default: none ; Info : Unless a specific framework such as Drupal or Wordpress has been ; detected, transactions are named according to the first script ; encountered, such as login.php. However, if you use a dispatcher ; file such as index.php this produces less useful data. If you use ; a dispatcher to redirect to actions such as "login", "show", "edit" ; etc, you can set this to the top level functions for those actions, ; and the function names specified here will be used to name the ; transaction. ; ;newrelic.webtransaction.name.functions = "" ; Setting: newrelic.webtransaction.name.files ; Type : string ; Scope : per-directory ; Default: none ; Info : Same as newrelic.webtransaction.name.functions above but using file ; names instead of function names. Accepts standard POSIX regular ; expressions. ; ;newrelic.webtransaction.name.files = "" ; Setting: newrelic.daemon.auditlog ; Type : string ; Scope : system ; Default: none ; Info : Sets the name of a file to record all uncompressed, un-encoded ; content that is sent from your machine to the New Relic servers. ; This includes the full URL for each command along with the payload ; delivered with the command. This allows you to satisfy yourself ; that the agent is not sending any sensitive data to our servers. ; This file must be a different file the the newrelic.daemon.logfile ; setting above. If you set it to the same name, ; then audit logging will be silently ignored. ; ;newrelic.daemon.auditlog = "/var/log/alt-php81-newrelic/audit.log" ; Setting: newrelic.transaction_events.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Collect and report transaction analytics event data. Event data ; allows the New Relic UI to show additional information such as ; histograms. This setting was formerly called ; newrelic.analytics_events.enabled. ; ;newrelic.transaction_events.enabled = true ; Setting: newrelic.attributes.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enable or disable the collection of attributes generated by the ; agent or generated by the user though newrelic_add_custom_parameter. ; This setting will take precedence over all other attribute ; configuration settings. For more information, please refer to: ; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes ; ;newrelic.attributes.enabled = true ; Setting: newrelic.transaction_events.attributes.enabled ; newrelic.transaction_tracer.attributes.enabled ; newrelic.error_collector.attributes.enabled ; newrelic.browser_monitoring.attributes.enabled ; newrelic.span_events.attributes.enabled ; Type : boolean ; Scope : per-directory ; Default: true, except for browser_monitoring.attributes.enabled ; Info : Control which destinations receive attributes. ; These configuration settings will override the .include and .exclude ; settings below. For more information, please refer to: ; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes ; ; These settings were formerly called: ; newrelic.transaction_tracer.capture_attributes ; newrelic.error_collector.capture_attributes ; newrelic.analytics_events.capture_attributes ; newrelic.browser_monitoring.capture_attributes ; ;newrelic.transaction_events.attributes.enabled = true ;newrelic.transaction_tracer.attributes.enabled = true ;newrelic.error_collector.attributes.enabled = true ;newrelic.browser_monitoring.attributes.enabled = false ;newrelic.span_events.attributes.enabled = true ; Setting: newrelic.attributes.include ; newrelic.attributes.exclude ; ; newrelic.transaction_events.attributes.include ; newrelic.transaction_events.attributes.exclude ; ; newrelic.transaction_tracer.attributes.include ; newrelic.transaction_tracer.attributes.exclude ; ; newrelic.error_collector.attributes.include ; newrelic.error_collector.attributes.exclude ; ; newrelic.browser_monitoring.attributes.include ; newrelic.browser_monitoring.attributes.exclude ; ; newrelic.span_events.attributes.include ; newrelic.span_events.attributes.exclude ; ; Type : string ; Scope : per-directory ; Default: none ; Info : Each attribute has a default set of destinations. For example, the ; 'request_uri' attribute's default destinations are errors and ; transaction traces. The 'httpResponseCode' attribute's default ; destinations are errors, transaction traces, and transaction events. ; ; These configuration options allow complete control over the ; destinations of attributes. ; ; To include the attribute whose key is 'alpha' in errors, the ; configuration is: ; newrelic.error_collector.include = alpha ; ; To exclude the attribute whose key is 'alpha' from errors, the ; configuration is: ; newrelic.error_collector.exclude = alpha ; ; The newrelic.attributes.exclude and newrelic.attributes.include ; settings affect all destinations. ; ; To exclude the attributes 'beta' and 'gamma' from all destinations, ; the configuration is: ; newrelic.attributes.exclude = beta,gamma ; ; If one of the values in the comma separated list ends in a '*', ; it will match any suffix. For example, to exclude any attributes ; which begin with 'psi', the configuration is: ; newrelic.attributes.exclude = psi* ; ; For more information, please refer to: ; https://docs.newrelic.com/docs/agents/manage-apm-agents/agent-metrics/agent-attributes ; ;newrelic.attributes.include = "" ;newrelic.attributes.exclude = "" ; ;newrelic.transaction_events.attributes.include = "" ;newrelic.transaction_events.attributes.exclude = "" ; ;newrelic.transaction_tracer.attributes.include = "" ;newrelic.transaction_tracer.attributes.exclude = "" ; ;newrelic.error_collector.attributes.include = "" ;newrelic.error_collector.attributes.exclude = "" ; ;newrelic.browser_monitoring.attributes.include = "" ;newrelic.browser_monitoring.attributes.exclude = "" ; ;newrelic.span_events.attributes.include = "" ;newrelic.span_events.attributes.exclude = "" ; Setting: newrelic.feature_flag ; Type : string ; Scope : system ; Default: none ; Info : Enables new and experimental features within the PHP agent. These ; flags are used to selectively enable features that are intended to be ; enabled by default in later versions of the PHP agent. ; ;newrelic.feature_flag = "" ; Setting: newrelic.custom_insights_events.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables the API function newrelic_record_custom_event. ; ;newrelic.custom_insights_events.enabled = true ; Setting: newrelic.custom_events.max_samples_stored ; Type : integer ; Scope : per-directory ; Default: 30000 ; Info : The default Custom Events reservoir limit in the agent is ; 30000 events per minute and the maximum allowed value ; is 100000 events per minute. ; ;newrelic.custom_events.max_samples_stored = 30000 ; Setting: newrelic.labels ; Type : string (Use quotes) ; Scope : per-directory ; Default: none ; Info : Sets the label names and values to associate with the application. ; The list is a semi-colon delimited list of colon-separated name and ; value pairs. ; ; There are a maximum of 64 label name/value pairs allowed. ; ; The maximum length of the name and value is 255 characters each. ; ; Leading or trailing whitespace in the name or value will be trimmed. ; ; UTF-8 characters are allowed. ; ; E.g., "Server:One;Data Center:Primary" ; ;newrelic.labels = "" ; Setting: newrelic.synthetics.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables support for Synthetics transactions. ; For more information, please see: ; https://docs.newrelic.com/docs/synthetics/new-relic-synthetics/getting-started/new-relic-synthetics ; ;newrelic.synthetics.enabled = true ; Setting: newrelic.cross_application_tracer.enabled ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Enables or disables support for Cross Application Tracing, aka "CAT". ; NOTE: As of April 2022 CAT has been deprecated and will be removed at a future date. ; ;newrelic.cross_application_tracer.enabled = false ; Setting: newrelic.distributed_tracing_enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Distributed tracing lets you see the path that a request takes ; through your distributed system. See this guide for more information: ; https://docs.newrelic.com/docs/distributed-tracing/concepts/introduction-distributed-tracing ; When distributed tracing is enabled it changes the behavior of some ; New Relic features. See this guide for details: ; https://docs.newrelic.com/docs/transition-guide-distributed-tracing ; ;newrelic.distributed_tracing_enabled = true ; Setting: newrelic.distributed_tracing_exclude_newrelic_header ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Set this to true to exclude the New Relic distributed tracing header ; that is attached to outbound requests, and to instead only rely on ; W3C Trace Context Headers for distributed tracing. If this is false ; then both types of headers are attached to outbound requests. ; ; The New Relic distributed tracing header allows interoperability ; with older agents that do not support W3C Trace Context headers. ; Agent versions that support W3C Trace Context headers will ; prioritize them over New Relic headers for distributed tracing. ; ;newrelic.distributed_tracing_exclude_newrelic_header = false ; Setting: newrelic.span_events_enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables the creation of span events. This requires ; Distributed Tracing to be enabled. ; ;newrelic.span_events_enabled = true ; Setting: newrelic.span_events.max_samples_stored ; Type : unsigned integer ; Scope : per-directory ; Default: 2000 ; Info : The maximum number of span events added to the span event reservoir ; per transaction. A value of 0 will use the agent default. The max ; setting is 10000. ; ;newrelic.span_events.max_samples_stored = 0 ; Setting: newrelic.infinite_tracing.trace_observer.host ; Type : string ; Scope : per-directory ; Default: ; Info : Configures the Trace Observer used for Infinite Tracing. If empty, ; Infinite Tracing support will be disabled. This requires Distributed ; Tracing and span events to be enabled. ; ;newrelic.infinite_tracing.trace_observer.host= ; Setting: newrelic.infinite_tracing.trace_observer.port ; Type : integer ; Scope : per-directory ; Default: 443 ; Info : Configures the port used to communicate with the Infinite Tracing ; Trace Observer. This setting is ignored if ; newrelic.infinite_tracing.trace_observer.host is empty. This setting ; will not usually need to be changed. ; ;newrelic.infinite_tracing.trace_observer.port=443 ; Setting: newrelic.infinite_tracing.span_events.queue_size ; Type : integer (1000 or higher) ; Scope : per-directory ; Default: 100000 ; Info : Sets the number of span events that can be queued for transmission ; to the Infinite Tracing Trace Observer. ; ; The agent internally manages span events for Infinite Tracing in ; span batches. Those span batches can hold a maximum of 1000 spans. ; Therefore, the span events queue size cannot be lower than 1000, as ; otherwise not even a single span batch can be queued. If a queue ; size lower than 1000 is specified, the mininum size of 1000 is used. ; ;newrelic.infinite_tracing.span_events.queue_size=100000 ; Setting: newrelic.transaction_tracer.gather_input_queries ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables support for tracing Doctrine DQL with Slow SQL queries. ; This requires Slow SQLs to be enabled. ; ;newrelic.transaction_tracer.gather_input_queries = true ; Setting: newrelic.error_collector.capture_events ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables capturing error events, which are displayed as ; Error Analytics in the UI. ; ;newrelic.error_collector.capture_events = true ; Setting: newrelic.guzzle.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables support for the Guzzle library. ; ;newrelic.guzzle.enabled = true ; Setting: newrelic.phpunit_events.enabled ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Collect and report PHPUnit (https://phpunit.de/) data as custom ; Insights events. Test suite summary data are sent as "TestSuite" ; events, while individual test cases are sent as "Test" events. ; Depending on your events retention policy, enabling this setting may ; impact your billing statement. ; ; Please note that exception messages are collected and sent with ; events. Additionally, if you use PHPUnit's --disallow-test-output ; flag, any offending output from a risky test will also be included. ; ;newrelic.phpunit_events.enabled = false ; Setting: newrelic.datastore_tracer.instance_reporting.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables capturing datastore instance information, ; specifically host and port_path_or_id. This information is sent as a ; metric and as attributes on transaction traces and slow SQL traces. ; ;newrelic.datastore_tracer.instance_reporting.enabled = true ; Setting: newrelic.datastore_tracer.database_name_reporting.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Enables or disables capturing information about database names. This ; information is sent as an attribute on transaction traces and slow ; SQL traces. ; ;newrelic.datastore_tracer.database_name_reporting.enabled = true ; Setting: newrelic.security_policies_token ; Type : string ; Scope : per-directory ; Default: none ; Info : Enables or disables security policies. If security policies are ; enabled on your account, you should paste the security policies token ; from the New Relic APM UI here. ; ; IMPORTANT: This setting is not compatible with newrelic.high_security. ; Only one may be set. If both are set an error will be thrown and the ; agent will not connect. ; ;newrelic.security_policies_token = "" ; Setting: newrelic.preload_framework_library_detection ; Type : boolean ; Scope : system ; Default: true ; Info : Enables detection of frameworks and libraries from opcache. ; ; This only happens when preloading is enabled (when `opcache.preload` ; is set). ; ;newrelic.preload_framework_library_detection = true ; setting: newrelic.transaction_tracer.max_segments_web ; type : integer in the range 0 - 2^31-1 ; scope : per-directory ; default: 0 ; info : Specifies the maximum number of segments the PHP agent shall ; record, once that maximum is reached sampling will occur. ; ; The PHP agent reports transaction traces and distributed traces as a ; collection of segments. ; Each segment represents a method or a function call in a transaction ; trace. The default value for this configuration is 0, indicating that ; the PHP agent shall capture all segments during a transaction. At the ; end of a transaction, it assembles the highest priority segments to ; report in a transaction trace. ; ; For long-running PHP processes with hundreds of thousands or millions ; of function calls, setting this to a value greater than 1 prevents the ; PHP agent from exhausting system memory when recording segments. ; ; Segment size can vary based upon the length of the corresponding ; method's name, the length of its class name, and the number of ; subsequent calls made by the method. That said, a conservative estimate ; is 400 bytes per segment. To limit the PHP agent to 40 mb for segment ; capture, set this value to 100000. If this value is set lower than ; 2000, it further limits the total number of segments reported for ; transaction traces. ; ; This configuration setting is only for PHP web processes; it will not ; effect PHP CLI processes. To set a limit for CLI processes use ; newrelic.transaction_tracer.max_segments_cli. ;newrelic.transaction_tracer.max_segments_web = 0 ; setting: newrelic.transaction_tracer.max_segments_cli ; type : integer in the range 0 - 2^31-1 ; scope : per-directory ; default: 100000 ; info : Specifies the maximum number of segments the PHP agent shall ; record, once that maximum is reached sampling will occur. ; ; The PHP agent reports a transaction trace as a collection of segments. ; each segment represents a method or a function call in a transaction ; trace. The default value for this configuration is 100000. When a value ; of less than 1 is set, it will indicate that the PHP agent shall capture ; all segments during a transaction. At the end of a transaction, the agent ; assembles the highest priority segments to report in a transaction trace. ; ; For long-running PHP processes with hundreds of thousands or millions ; of function calls, setting this to a value greater than 1 prevents the ; PHP agent from exhausting system memory when recording segments. ; ; Segment size can vary based upon the length of the corresponding ; method's name, the length of its class name, and the number of ; subsequent calls made by the method. That said, a conservative estimate ; is 400 bytes per segment. To limit the PHP agent to 40 mb for segment ; capture, set this value to 100000. If this value is set lower than 2000, ; it further limits the total number of segments reported for transaction ; traces. ; ; This configuration setting is only for PHP CLI processes; it will not ; effect PHP web processes. To set a limit for web processes use ; newrelic.transaction_tracer.max_segments_web. ;newrelic.transaction_tracer.max_segments_cli = 100000 ; Setting: newrelic.capture_params ; Info : This setting has been deprecated. ; It was formerly used to capture request parameters. ; It has been replaced by the attribute configuration settings. ; To replicate this setting with the new settings, one would use: ; ; newrelic.transaction_tracer.attributes.include = request.parameters.* ; newrelic.error_collector.attributes.include = request.parameters.* ; ; Please refer to the attribute configuration options for more ; information. ; Setting: newrelic.ignored_params ; Info : This setting has been deprecated. ; It was formerly used to filter request parameters. ; It has been replaced by the attribute configuration settings. ; If you would like to exclude the request parameter 'alpha', use: ; ; newrelic.attributes.exclude = request.parameters.alpha ; ; Please refer to the attribute configuration options for more ; information. ; Setting: newrelic.framework.drupal.modules ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Indicates if Drupal modules, hooks and views are to be instrumented. ; ;newrelic.framework.drupal.modules = true ; Setting: newrelic.framework.wordpress.hooks ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Indicates if WordPress hooks are to be instrumented. ; ;newrelic.framework.wordpress.hooks = true ; Setting: newrelic.application_logging.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : An overall configuration for enabling/disabling all application ; logging features. If this is disabled, all sub-features are disabled; ; if it is enabled, the individual sub-feature configurations ; take effect. ; ;newrelic.application_logging.enabled = true ; Setting: newrelic.application_logging.forwarding.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Toggles whether the agent gathers log records for sending to New Relic. ; ;newrelic.application_logging.forwarding.enabled = true ; Setting: newrelic.application_logging.forwarding.max_samples_stored ; Type : integer ; Scope : per-directory ; Default: 10000 ; Info : Number of log records to send per minute to New Relic. Controls the ; overall memory consumption when using log forwarding. ; ;newrelic.application_logging.forwarding.max_samples_stored = 10000 ; Setting: newrelic.application_logging.forwarding.log_level ; Type : string ; Scope : per-directory ; Default: "WARNING" ; Info : Sets the minimum log level to be collected when log forwarding ; is enabled. ; ; Based on ; https://www.php-fig.org/psr/psr-3/#5-psrlogloglevel ; https://datatracker.ietf.org/doc/html/rfc5424 ; ; Valid settings (ordered highest to lowest): ; "EMERGENCY" ; "ALERT" ; "CRITICAL" ; "ERROR" ; "WARNING" ; "NOTICE" ; "INFO" ; "DEBUG" ; ;newrelic.application_logging.forwarding.log_level = "WARNING" ; Setting: newrelic.application_logging.metrics.enabled ; Type : boolean ; Scope : per-directory ; Default: true ; Info : Toggles whether the agent gathers the Logging/lines and ; Logging/lines/{SEVERITY} Logging Metrics used in the Logs chart ; on the APM Summary page. ; ;newrelic.application_logging.metrics.enabled = true ; Setting: newrelic.code_level_metrics.enabled ; Type : boolean ; Scope : per-directory ; Default: false ; Info : Toggles whether the agent provides function name, function ; filepath, function namespace, and function lineno as ; attributes on reported spans ; ;newrelic.code_level_metrics.enabled = false